3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? cable accessory strain relief/grounding clamp 3504 series 3m part number dimension a dimension b dimension c dimension d dimension e 3504-2 3.50 [ 88.9 ] 2.50 [ 63.5 ] 3.10 [ 78.7 ] .20 [ 5.1 ] .50 [ 12.7 ] 3504-3 4.25 [ 108.0 ] 3.25 [ 82.6 ] 3.87 [ 98.3 ] .19 [ 4.8 ] .50 [ 12.7 ] 3504-4 5.50 [ 139.7 ] 4.50 [ 114.3 ] 5.12 [ 130.0 ] .19 [ 4.8 ] .50 [ 12.7 ] ? jacketed cable strain relief/grounding clamps transfer stresses and strains to the cabinet, preventing damage to the connector and other internal devices. they can also be used to ground shielded cable to the cabinet. ? rohs* compliant ts-0268-10 sheet 1 of 2 date modified: december 17, 2006 "rohs compliant" means that the product or part does not contain any of the following substances in excess of the following max imum concentration values in any homogeneous material, unless the subs tance is in an application that is exempt under rohs: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybromi nated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (b y weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3m's knowledge and belief based upo n information provided by third party suppliers to 3m.
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? cable accessory strain relief/grounding clamp 3504 series ordering information 3504-x cable width (maximum) 2 = 2.92 [ 74.2 ] 3 = 3.69 [ 93.7 ] 4 = 4.94 [ 125.5 ] note: packaged 100 per bag. notes: 1. material: aluminum. 2. plating per mil-c-4451, class 3 clear. 3. includes four #8-32 round head screw. 4x ? .18 holes [ 4.57 ] 4x mounting holes 4x 8-32 tapped holes .38 [ 9.5 ] bottom .75 [ 19.05 ] .20 [ 5.16 ] .50 [ 12.7 ] .20 [ 5.2 ] a b e c d top .38 [ 9.5 ] ts-0268-10 sheet 2 of 2 inch [mm] .010 .1 .05 tolerance unless noted .0 .00 .000 inch [ ] dimensions for reference only
|
